Dedicated to quality for over 50 years

2 to 6 positions CMP 6 N rotary switch for welding connection

Rotary switch CMP 6 N for welding connection

The CMP 6 N is a 2 to 6 positions rotary switch, with a maximum number of poles of 3 by wafer. The index angle between each position is 60°, 90° or . This rotary switch can be commanded with or withour key. The command shaft has a diameter of Ø6 mm or Ø6,35 mm. The type of connection on this rotary switch are:
  • wire welding
The contacts on this rotary switch CMP 6 N can be gold, and the rotary switch in Marine quality, with a sealing IP65. The rotary switch CMP 6 N can be modified to receive a system:
  • Pull to turn
  • Push to turn
  • Return to center

Details of CMP 6 N rotary switch

Main features of CMP 6 N rotary switch

  • Number of positions: 2, 3, 4, 5, 6
  • Index angle: 60°, 90° or
  • Maximum number of poles by wafer: 3
  • Shaft diameter: Ø6 mm or Ø6,35 mm
  • Type of contacts: gold
  • Dimension of switch body: ∅36 mm Variable depth

Options available on CMP 6 N rotary switch

  • Command by key: with or without
  • Pull to turn: yes
  • Push to turn: yes
  • Return to center: yes
  • Connection by wire: yes
  • Connection by connector: no
  • Connection on printed circuit: no
  • Marine quality: yes
  • Sealing: IP65

Electric characteristics of CMP 6 N rotary switch

  • Maximum voltage: 115 V
  • Maximum current with cut: 2 A
  • Maximum current without cut : 5 A
  • Maximum switch rating: 150 W

Documentation of CMP 6 N rotary switch

Technical data sheet