Dedicated to quality for over 50 years

12 to 12 positions CLT 5 rotary switch for printed circuit

Rotary switch CLT 5 for printed circuit

The CLT 5 is a 12 to 12 positions rotary switch, with a maximum number of poles of 2 by wafer. The index angle between each position is 30° or 45°. This rotary switch is commanded by key. The command shaft has a diameter of ØN/A mm. The type of connection on this rotary switch are:
  • printed circuit
The contacts on this rotary switch CLT 5 can be gold, and the rotary switch in acier quality. The rotary switch CLT 5 can be modified to receive a system:

Details of CLT 5 rotary switch

Main features of CLT 5 rotary switch

  • Number of positions: 12
  • Index angle: 30° or 45°
  • Maximum number of poles by wafer: 2
  • Shaft diameter: ØN/A mm
  • Type of contacts: gold
  • Dimension of switch body: 31,7 x 30,5 x 21 mm

Options available on CLT 5 rotary switch

  • Command by key: yes
  • Pull to turn: no
  • Push to turn: no
  • Return to center: no
  • Connection by wire: no
  • Connection by connector: no
  • Connection on printed circuit: yes
  • Marine quality: no
  • Sealing: non

Electric characteristics of CLT 5 rotary switch

  • Maximum voltage: 30 V
  • Maximum current with cut: 0,1 A
  • Maximum current without cut : 0,5 A
  • Maximum switch rating: 3 W

Documentation of CLT 5 rotary switch

Technical data sheet