TECHNICAL SHEET
SUB Serie
SUB A 24
Industrial Rotary Switch
SUB Serie
SUB A 24 Model
TECHNICAL DRAWING AND CHARACTERISTICS

General characteristics :

Electrical characteristics :

  • Angle between 2 positions: 15°-30°-45°-60°-90°
  • Max. panel thickness: 6
  • Sealing joints on request
  • Max. operating temperature – dry heat: +85°C
  • Min. operating temperature – dry cold: -55°C
  • Insulation: alkyd
  • Switches with solid silver contacts
  • Diameter of cable hole:
    • in contact blades: 1.1 mm
    • in pole-pieces: 1.1 mm
  • Max. voltage: 150V
  • Max. current:
    • with cut: 0.5 A
    • without cut: 3 A
  • Max breaking power: 45 W
  • Contact resistance: 0.01 miliohm
  • Dielectric strength:
    • between non shorting contacts: 2000 Vdc
    • between contacts and pole-pieces: 2000 Vdc
    • between contacts, pole-pieces and ground: 2000 Vdc
  • Insulation resistance:
    • between two adjacent contacts: 1.10^6 Megaohm
    • between contacts and ground: 1.10^5 Megaohm
Dimensions, cotes L
Standard assembly
Shortened assembly
Simple wafer
Double wafer
Simple wafer
Double wafer
1 wafer
31
39
31
40
2 wafers
51

69
48
60
3 wafers
71
98
65
82
4 wafers
91
127
83
104
5 wafers
112
156
100
125
6 wafers
142
195
127
156
For each added wafer
20.2
29.2
17.2
21.5

Note:
For double wafers with 16 and 24 poles (8 and 12 poles per stator face), add 6,5 mm per wafer to L
Principal combinations available per stator face according to angular gap
Angle between two positions
15°
30°
45°
60°
90°
Number of poles
1
2
3
4
6
8
12
1
2
3
4
6
8
1
2
4
1
2
3
4
1
2
3
Number of positions
24
12
8
6
4
3
2
12
6
4
3
2
2
8
4
2
6
3
2
2
4
2
2
Important:
  • The stops are user adjustable from 2 to 6 or 7 to 12 positions
  • Availlable with 24, 12, 8, 6 and 4 positions on a full turn
    • Version CC: Shorting contacts, (make before break)
    • Version E: Panel sealing, add 2mm to L
    • Version M: Navy quality with or without sealing
    • Version SP: Solder terminals are replaced by solder pins for PCB mounting
    • Version R: Straigth terminals to reduce L
  • Other versions:
    • Gold plated contacts 3µ over nickel plating
    • Open circuit on 12 positions at 30°
    • Biased indexing (momentary contacts)
    • Security system with pull or push to turn
    • Activation by RONIS or KABA key
    • Assembly with counter-turning indexing
    • Hollow shaft (diameter 6 x 3,1 o diameter 10 x 6,1) for mounting with other components (switch, potentiometer)
    • Standard shafts and special shafts
© IEC Electronique - Juillet 2001 -