TECHNICAL SHEET
SUB Serie
SUB A 12 SP and S 12 SP
Industrial Rotary Switch
SUB Serie
SUB A 12 SP and SUB S 12 SP Model
TECHNICAL DRAWING AND CHARACTERISTICS

General characteristics :

Electrical characteristics :

  • Angle between two positions: 30°-60°-90°-120°
  • Max. panel thickness: 5
  • Sealing joints on request
  • Max. operating temperature : dry heat: +85 for SUB A 12 SP 5+125°C for SUB S 12 SP)
  • Min. operating temperature : dry cold: -55°C
  • Insulation: alkyd (steatit for SUB S 12 SP)
  • Switches with solid silver contacts
  • Diameter of cable hole:
    • in contact blades: 1.1 mm
    • in pole-pieces: 1.3 mm
  • Max. voltage: 150V
  • Max. current:
    • with cut: 0.5 A
    • without cut: 3 A
  • Max breaking power: 45 W
  • Contact resistance: 0.01 miliohm
  • Dielectric strength:
    • between non shorting contacts: 3000 Vdc
    • between contacts and pole-pieces: 2000 Vdc
    • between contacts, pole-pieces and ground: 1500 Vdc
  • Insulation resistance:
    • between two adjacent contacts: 1.10^6 Megaohm
    • between contacts and ground: 1.10^5 Megaohm
Dimensions, cotes L
Standard assembly
Shortened assembly
Simple wafer
Double wafer
Simple wafer
Double wafer
1 wafer
26
38
25
35
2 wafers
47
66
44
60
3 wafers
67
95
62
85
4 wafers
88
123
81
109
5 wafers
109
152
99
133
6 wafers
129
180
118
158
For each added wafer
20.5
28.5
18.5
24.5

Note:
For double wafers with 8 and 12 poles (4 and 6 poles per stator face), add 6,5 mm per wafer to L
Principal combinations available per stator face according to angular gap
Angle between two positions
30°
Number of poles
1
2
3
4
6
Number of positions
12
6
4
3
2
Inputs
A
A
D
A
C
E
F
B
C
E
A
B
C
D
E
F
Outputs
1 à 12
1 à 6
7 à 12
1 à 4
5 à 8
9 à 12
11 à 1
2 à 4
5 à 7
8 à 10
1 à 2
3 à 4
5 à 6
7 à 8
9 à 10
11 à 12
© IEC Electronique - Juillet 2001 -