TECHNICAL SHEET
SUB Serie
SUB A 10 SP and S 10 SP
Industrial Rotary Switch
SUB Serie
SUB A 10 SP and SUB S 10 SP Model
TECHNICAL DRAWING AND CHARACTERISTICS

General characteristics :

Electrical characteristics :

  • Angle between two positions: 36°-72°
  • Max. panel thickness: 5
  • Sealing joints on request
  • Max. operating temperature :dry heat: +85°C for SUB A10 SP (+125°C for SUB S 10 SP)
  • Min. operating temperature :dry cold: -55°C
  • Insulation: Alkyd (steatit for SUB S10 SP)
  • Switches with solid silver contacts
  • Diameter of cable hole:
    • in contact blades: 1.1 mm
    • in pole-pieces: 1.3 mm
  • Max. voltage: 150V
  • Max. current:
    • with cut: 0.5 A
    • without cut: 3 A
  • Max breaking power: 45 W
  • Contact resistance: 0.01 miliohm
  • Dielectric strength:
    • between non shorting contacts: 3000 Vdc
    • between contacts and pole-pieces: 2000 Vdc
    • between contacts, pole-pieces and ground: 1500 Vdc
  • Insulation resistance:
    • between two adjacent contacts: 1.10^6 Megaohm
    • between contacts and ground: 2.10^5 Megaohm
Dimensions, cotes L
Standard assembly
Shortened assembly
Simple wafer
Double wafer
Simple wafer
Double wafer
1 wafer
26
38
26
37
2 wafers
48
66
46
62
3 wafers
69
95
65
85
4 wafers
89
123
83
111
5 wafers
110
152
102
135
6 wafers
130
180
120
160
For each added wafer
20.5
28.5
18.5
24.5

Note:
For double wafers with 8 poles (4 poles per stator face), add 6,5 mm per wafer to L
Principal combinations available per stator face according to angular gap
Angle between two positions
36°
Number of poles
1
2
4
Number of positions
10
5
2
Inputs
A
A
C
A
B
C
D
Outputs
1 à 10
1 à 5
6 à 10
1 à 2
4 à 5
6 à 7
9 à 10
© IEC Electronique - Juillet 2001 -