TECHNICAL SHEET
MINI Serie
MINI S 16 and 20
Industrial Rotary Switch
MINI Serie
MINI S 16 and 20 Model
TECHNICAL DRAWING AND CHARACTERISTICS

 

General characteristics :

Electrical characteristics :

  • Angle between 2 positions: 22°30'-45°-18°-36°-72°-90°
  • Max. panel thickness: 6
  • Sealing joints on request
  • Max. operating temperature – dry heat: +125°C
  • Min. operating temperature – dry cold: -55°C
  • Insulation: steatit
  • Switches with solid silver contacts
  • Diameter of the cable hole:
    • in contact blades: 1.5 mm
    • in pole-pieces: 1.5 mm
  • Max. voltage: 200V
  • Max. current:
    • with cut: 1 A
    • without cut: 5 A
  • Max. breaking power: 75 W
  • Contact resistance: 0.01 miliohm
  • Dielectric strength:
    • between non shorting contacts: 4500 Vdc
    • between contacts and pole pieces: 3000 Vdc
    • between contacts, pole pieces and ground: 5000 Vdc
  • Insulation resistance:
    • between two adjacent contacts: 1.10^6 Megaohm
    • between contacts and ground: 5.10^5 Megaohm
Dimensions, cotes L
Standard assembly
Shortened assembly
Simple wafer
Double wafer
Simple wafer
Double wafer
1 wafer
35
46
33
40
2 wafers
60
77
53
65
3 wafers
91
114
79
97
4 wafers
116
145
99
122
5 wafers
141
176
119
147
6 wafers
166
210
139
177
For each added wafer
25
31
20
25

Note:
In both standard and shortened assemblies with 3, 4 or 5 wafers the dimension L includes a spacer behind the last wafer for bracket fixing.
Principal combinations available per stator face according to angular gap
MINI S 16 Model
Angle between 2 positions
22°30
45°
Number of poles
1
2
3
4
8
1
2
3
4
Number of positions
16
8
5
4
2
8
4
3
2
MINI S 20 Model
  
Angle between 2 positions
18°
36°
72°
90°
Number of poles
1
2
4
5
10
1
2
4
5
1
2
4
1
2
Number of positions
20
10
5
4
2
10
5
3
2
5
3
2
4
2
Important:
  • The stops are user adjustable from 2 to 16 or 20 positions
  • Availlable with 16 and 8 (MINI S 16) or 20, 10, 5 and 4 (MINI S 20) positions on a full turn
    • Version CC: Shorting contacts, (make before break)
    • Version E: Panel sealing, add 2mm to L
    • Version M: Navy quality with or without sealing
    • Version R: Straigth terminals to reduce L
  • Other versions:
    • Gold plated contacts 3µ over nickel plating
    • Open circuit on 16 positions (MINI S 16) or on 10 positions at 36° (MINI S 20)
    • Rotation only clockwise or anti clockwise
    • Activation by RONIS or KABA key
    • Assembly with counter-turning indexing
    • Hollow shaft (diameter 6 x 3,1 o diameter 10 x 6,1) for mounting with other components (switch, potentiometer)
    • Standard shafts and special shaft
© IEC Electronique - Juillet 2001 -