TECHNICAL SHEET
MINI Serie
MINI A 12 SP and S 12 SP

Industrial Rotary Switch
MINI Serie
MINI A 12 SP and S 12 SP Models
TECHNICAL DRAWING AND CHARACTERISTICS

 

General characteristics :

Electrical characteristics :

  • Angle between 2 positions: 30°-60°-90°-120°
  • Max. panel thickness: 6
  • Sealing joints on request
  • Max. operating temperature : dry heat: +85°C
  • Min. operating temperature : dry cold: -55°C
  • Insulation: alkyd
  • Switches with solid silver contacts
  • Diameter of the cable hole:
    • in contact blades: 1.5 mm
    • in pole-pieces: 1.5 mm
  • Max. voltage: 200V
  • Max. current:
    • with cut: 1 A
    • without cut: 5 A
  • Max. breaking power: 75 W
  • Contact resistance: 0.01 miliohm
  • Dielectric strength:
    • between non shorting contacts: 3000 Vdc
    • between contacts and pole pieces: 2500 Vdc
    • between contacts, pole pieces and ground: 2000 Vdc
  • Insulation resistance:
    • between two adjacent contacts: 2.10^6 Megaohm
    • between contacts and ground: 2.10^5 Megaohm
Dimensions , cotes L
Standard assembly
Shortened assembly
Simple wafer
Double wafer
Simple wafer
Double wafer
1 wafer
30
44
30
40
2 wafers
50
75
47
65
3 wafers
69
105
63
90
4wafers
89
136
75
114
5 wafers
108
165
93
140
6 wafers
128
195
109
164
For each added wafer
19.6
30.3
15.3
24.6

Note:
Where more than 6 wafers are stacked, add the length given above for each additional wafer
Principal combinations available per stator face according to angular gap
Angle between two positions
30°
Number of poles
1
2
3
4
6
Number of positions
12
6
4
3
2
Inputs
A
A
D
A
C
E
A
C
D
F
A
B
C
D
E
F
Outputs
1 à 12
1 à 6
7 à 12
1 à 4
5 à 8
9 à 12
1 à 3
4 à 6
7 à 9
10 à 12
1 à 2
3 à 4
5 à 6
7 à 8
9 à 10
11 à 12
© IEC Electronique - Juillet 2001