TECHNICAL SHEET
CAG Serie
CAG 12
Industrial Rotary Switch
CAG Serie
CAG 12 Model
TECHNICAL DRAWING AND CHARACTERISTICS

 

General characteristics :

Electrical characteristics :

  • Angle between two positions: 90°,60°,30° and 15°
  • Shaft diameter: 6 mm
  • Tie rod diameter: 1,5x0,30
  • Central bush diameter: 10x1
  • Maximum panel thickness: 6 mm
  • Sealing joints on request
  • Insulation: reinforced Alkyd
  • Solid silver contacts
  • Temperature range: -55°C +85°C
  • Resistance of stop: 10 Kg/cm
  • Max. voltage: 300 V
  • Max. current:
    • with cut: 1 A
    • without cut: 5 A
  • Switch rating: 100 W
  • Contact resistance: 5 milliohm
  • Shorting or non-shorting contacts
  • Dielectric strength:
    • between two adjacent terminals: 3000 Vdc
    • between terminals and commons: 2500 Vdc
    • between terminals, commons and ground: 2000 Vdc
  • Insulation resistance:
    • between two adjacent terminals: 5.10^6 Megaohm
    • between terminals and ground: 1.10^5 Megaohm
Dimensions, cotes L
L
1 wafer
22.5
2 wafers
33
3 wafers
43.5
4 wafers
54
5 wafers
64.5
6 wafers
75
For each added wafer
10.5
Rincipal combinations available per stator face according to angular gap
Angle between two positions
30°
60°
90°
Number of poles
1
2
3
4
6
1
2
3
4
1
2
3
Number of positions
12
6
4
3
2
6
3
2
2
4
2
2
Important:

The switch CAG 12 may be supplied with 24 positions at 15°. In this case, only the ratchet is different. The 24 positions are obtained by superposing the two wafers and connecting alternatively in zigzags. See the adjoining connecting diagram. In all cases this switch can be supplied with shorting or non-shorting contacts.

There is an option of CAG 12 with adjustable stops (in this case, increase dimension L by 1 mm)
There is a CAG 10 version: 10 positions at 36°
© IEC Electronique - Juillet 2001 -