TECHNICAL SHEET
CAF Serie
CAF 12 CI
Industrial Rotary Switch
CAF Serie
CAF 12 CI Model
TECHNICAL DRAWING AND CHARACTERISTICS

General characteristics :

Electrical characteristics :

  • Angle between two positions: 60° et 30°
  • Shaft diameter: 4 mm
  • Tie rod diameter: 1x0.25
  • Central bush diameter: 7x0.75
  • Maximum panel thickness: 3.5 mm
  • Sealing joints on request
  • Insulation: reinforced Alkyd
  • Solid silver contacts
  • Temperature range: -55°C +85°C
  • Resistance of stop: 5 Kg/cm
  • Max. voltage: 150 V
  • Max. current:
    • with cut: 0.3 A
    • Without cut: 1.5 A
  • Switch rating: 25 W
  • Contact resistance: 10 milliohm
  • Shorting or non-shorting contacts
  • Dielectric strength:
    • between two adjacent terminals: 1000 Vdc
    • between terminals and commons: 1000 Vdc
    • between terminals, commons and ground: 1000 Vdc
  • Resistance isolement:
    • between two adjacent terminals: 3.10^5 Megaohms
    • between terminals and ground: 3.10^5 Megaohms
Dimensions, cotes L
CAF 12 CIB
CAF 12 CID
1 wafer
28
25.5
2 wafers
46
41
3 wafers
63.5
56
4 wafers
81.5
71
5 wafers
99
86.5
6 wafers
116.5
101.5
For each added wafer
17.64
15.12
Principal combinations available per stator face according to angular gap
Angle of 30° betweent two positions
CAF 10 CIB
CAF 10 CID
Number of poles
1
2
3
4
6
1
2
3
4
Number of positions
12
6
4
3
2
11
5
3
2
Important:

This model is available in two versions:

  • CAF 12 CIB: Outputs on a single face with utilisation of all positions (from 1 pole 12 positions to 6 poles 2 positions)
  • CAF 12 CID: Outputs on a single face in American combination (1 pole 11 positions, 4 poles 2 positions)

The stacking dimensions L of model D are slightly less than those of model B. If the interaxial is too small, a spacer can be added permitting distances of 5.04 mm to be obtained. In this cas it would be necessary to add the length L as many times 2.52 mm as there are additional wafers stacked.

The stop pins are not adjustable.
© IEC Electronique - Juillet 2001 -