IEC Electronique - Commutateurs sur circuit imprimé

ROTARY SWITCHES FOR PRINTED CIRCUIT FIXING

You can find on this page all our rotary switches designed for printed circuit fixing.
You can also consult all our technical sheets by clicking on the "TECHNICAL SHEET" icon.

Rotary switches for printed circuit fixing\ MCK 12

Cell dimension without key : 24.5 x 19 x 19
"KABA-MICRO" key command

MCK 12

Rotary switches for printed circuit fixing \ K serie

Available in 5 versions:

KB : activated by knurleb knod
KD: panel mounting activated by screw driver
KF: activated by screw driver
KM: activated by serrated knob
KX: activated by special square foot (on request)

K serie

Rotary switches for printed circuit fixing\ CB 4

ell dimensions without shaft: 28.7 x 13.9 x 15.3 mm
Programmable switch working on 12 bits
Multi-cells assembly (to 36 bits)

CB 4

Rotary switches for printed circuit fixing\ CH 144

Cell dimensions without shaft: 28.7 x 13.9 x 15.3 mm
Programmable switch working on 12 bits
Multi-cells assembly (to 36 bits)

CH 144

Rotary switches for printed circuit fixing \ CH 8

Cell dimensions without shaft: 29.5 x 25.5 x 29
Programmable switch working on 8 bits
also available: switches working on 16 and 32 bits (CH 16 and CH 32)

CH 8

CH 16

CH 32

CAF SERIE

The CAF Serie is made from the CAF 10 N Model, swith with 10 positions, in 12, 16 and 26 positions models : CAF 12 N, CAF 16 N et CAF 26 N.
The CAF XX N models aren't designed for PCB mounting but there are special models for printed circuit fixing: CAF XX SP et CAF XX CI.

SP versions have the same characteristics as the N versions but the tabs are replaced by printed circuit outputs
CI versions are specifically designed for printed circuit fixing

Rotary switches for printed circuit fixing\ CAF 10 SP

Cote L: 19.5 (1 wafer)
Possibility to have multi-cells assembly
This switch has the same characteristics as the CAF 10 N but the tabs are replaced by printed circuit outputs

CAF 10 SP

Rotary switches for printed circuit fixing \ CAF 10 CI

This switch has the same characteristics as the CAF 10 N but is specifically designed for printed circuit fixing

CAF 10 CI

Rotary switches for printed circuit fixing \ CAF 12 SP

Cote L: 19.5 (1wafer)
Possibility to have multi-cells assembly
This switch has the same characteristics as the CAF 12 N but the tabs are replaced by printed circuit outputs

CAF 12 SP

Rotary switches for printed circuit fixing \ CAF 12 CI

This switch has the same characteristics as the CAF 12 N but is specifically designed for printed circuit fixing

CAF 12 CI

Rotary switches for printed circuit fixing \ CAF 16 SP

Cote L: 19.5 (1 wafer)
Possibility to have multi-cells assembly
This switch has the same characteristics as the CAF 16 N but the tabs are replaced by printed circuit outputs

CAF 16 SP

Rotary switches for printed circuit fixing \ CAF 16 CI

This switch has the same characteristics as the CAF 16 N but is specifically designed for printed circuit fixing

CAF 16 CI

Rotary switches for printed circuit fixing \ CAF 26 SP

Cote L: 20.4 (1wafer)
Possibility to have multi-cells assembly
This switch has the same characteristics as the CAF 26 N but the tabs are replaced by printed circuit outputs

CAF 26 SP

Rotary switches for printed circuit fixing \ CAG 12 SP

Cote L: 23.3 (1 wafer)
This switch has the same characteristics as the CAG 12 N but the tabs are replaced by printed circuit outputs

CAG 12 SP

SUB SERIE

There are two models in the SUB serie, SUB A 10 SP and SUB A 12 SP, which could be use for printed circuit fixing

Rotary switches for printed circuit fixing \ SUB A 10 SP

Cote L: 26 (1 simple wafer)
Possibility to have multi-cells assembly
This switch has the same characteristics as the SUB A 10 but the tabs are replaced by printed circuit outputs

SUB A 10 SP

Rotary switches for printed circuit fixing \ SUB A 12 SP

                                                                                               Cote L: 26 (1 simple wafer)
                                                                                     Possibility to have multi-cells assembly
                                   This switch has the same characteristics as the SUB A 12 but the tabs are replaced by printed circuit outputs

SUB A 12 SP

MINI SERIE

The MINI serie is made from the MINI A 12 model in 20, 24, 28 and 32 positions models :MINI A 20, MINI A 24, MINI A 28 and MINI A 32. There are also S versions which made switches work in a higher temperature range: MINI S 12, MINI S 16 and 20.
The switches MINI A 12 -20 - 24 - 28 - 32 and MINI S 12 have all got SP versions where tabs are replaced by printed circuit outputs . MINI A/S XX SP versions have the same characteristics as the MINI A/S XX versions.

Rotary switches for printed circuit fixing \ MINI A 12 SP

                                                                             Cote L: 30 (1 (1 simple wafer)
                                                                     Possibility to have multi-cells assembly
                  This switch has the same characteristics as the MINI S 12 but the tabs are replaced by printed circuit outputs

MINI A 12 SP

Rotary switches for printed circuit fixing \ MINI S 12 SP

                                                                           Cote L: 30 (1 (1 simple wafer)
                                                                 Possibility to have multi-cells assembly
               This switch has the same characteristics as the MINI S 12 but the tabs are replaced by printed circuit outputs

MINI S 12 SP

Rotary switches for printed circuit fixing \ MINI A 20 SP

Cote L: 34 (1 (1 simple wafer)
Possibility to have multi-cells assembly
This switch has the same characteristics as the MINI A 20 but the tabs are replaced by printed circuit outputs

MINI A 20 SP

Rotary switches for printed circuit fixing \ MINI A 24 SP

Cote L: 34 (1 (1 simple wafer)
Possibility to have multi-cells assembly
This switch has the same characteristics as the MINI A 24 but the tabs are replaced by printed circuit outputs

MINI A 24 SP

Rotary switches for printed circuit fixing \ MINI A 28 SP

Cote L: 34 (1 (1 simple wafer)
Possibility to have multi-cells assembly
This switch has the same characteristics as the MINI A 28 but the tabs are replaced by printed circuit outputs

MINI A 28 SP

Rotary switches for printed circuit fixing \ MINI A 32 SP

Cote L: 34 (1 simple wafer)
Possibility to have multi-cells assembly
This switch has the same characteristics as the MINI A 32 but the tabs are replaced by printed circuit outputs

MINI A 32 SP